NETIS P106C 4POE+2RJ45 100M 6 PORT Standard POE Switch

Interface 4*10/100Mbps POE ports(Data/Power)

2*10/100M uplink RJ45 ports (Data)

 Basic function  Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol

Supports POE IEEE 802. 3af/at compliant Powered Device (PD)

Store-and-forward switching scheme
Support IEEE802.3X full duplex and Backpressure half duplex
MAC address auto-learning & auto-aging

 Standards  IEEE 802.3 10BASE-T Ethernet

IEEE 802.3i 10BASE-T Ethernet

IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3af/at, Power over Ethernet
IEEE 802.3x Flow Control

 Mode  Normal switch mode/Extend mode
 Data Transfer Rate Etherent:10Mbps(Half-duplex);20Mbps(Full-duplex)

Fast Entherent:100Mbps(Half-duplex);200Mbps(Full-duplex)

 Store & Forwarding Yes
 Switching Capacity 1.2G
 MAC Address

Table Size

 Jumbo Frame  2048 byte
 Environment  Operation Temperature:0℃~40℃

Storage Temperature:-40℃~70℃

Operation Humidity:10%~90% RH Non-condensing

Storage Humidity:5%~90% RH Non-condensing

 Power Input POE


 Single port maximum power 30W,

Whole switch maximum power 60W Max

Support over-current,over-voltage and short-circuit protection

Support Soft Start of High  Power PD

Support sequential boot-up

Power Supply Pin:12+/36-

100-240V 1.5A Max(Input)

52V 1.15A Max(Output)

 Cabling type  100Base-TX: Cat 5e or better UTP/STP(≤100m)

10Base-TX: Cat 5e or better UTP/STP(≤250m)


(L x W x H )


৳ 3,260.00


Netis P106C is a 100M standard POE switch that provides 6*10/100M adaptive RJ45 ports. Ports 1~4 features POE power supply capability and can be used as Power over Ethernet devices. The power supply port can automatically detect and recognize the powered device that complies with the IEEE 802.3af/at standard and supply power through the network cable.Supports two modes: normal switch mode/250M ultra-long transmission. P106C makes it easier for you to deploy wireless access point (AP) and IP terminal network devices using POE technology.


  • Supporting 802.3 Ethernet, 802.u Faster Ethernet
  • Supports POE IEEE 802.3af/at compliant Powered Device (PD)
  • Modes: Normal switch mode/Extended mode(Port1-4:250Metres ultra-longtransmission)
  • Ports 1~4 features POE power supply capability and can be used as Power overEthernet devices
  • Auto MDI/MDIX crossover for all ports
  • Support full duplex based on IEEE802.3x and half duplex based on Backpressure
  • Support non-blocking wire speed forwarding
  • MAC address auto-learning & auto-aging
  • Steel case,the total POE power budget of 60W
  • Plug and play

Categories: ,

Based on 0 reviews

0.0 overall

Be the first to review “NETIS P106C 4POE+2RJ45 100M 6 PORT Standard POE Switch”

There are no reviews yet.