NETIS P116GH 16 FE POE+2GE Uplink POE Switch
| Hardware | |
| Interface | 16*10/100Mbps POE ports（Data/Power)
2*10/100/1000M uplink RJ45 ports (Data) 1*10/100/1000M uplink SFP slot port (Data) |
| Basic function | Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol
Supports POE IEEE 802. 3af/at compliant Powered Device (PD) Store-and-forward switching scheme |
| Standards | IEEE 802.3 10BASE-T Ethernet
IEEE 802.3i 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet |
| Mode | Normal switch mode/Extend mode |
| Data Transfer Rate | Etherent:10Mbps(Half-duplex);20Mbps(Full-duplex)
Fast Entherent:100Mbps(Half-duplex);200Mbps(Full-duplex) |
| Store & Forwarding | Yes |
| Switching Capacity | 9.2G |
| MAC Address
Table Size |
8K |
| Jumbo Frame | 2048 byte |
| Environment | Operation Temperature：0℃～40℃
Storage Temperature：-40℃～70℃ Operation Humidity：10%～90% RH Non-condensing Storage Humidity：5%～90% RH Non-condensing |
| Power Input POE
Standards |
Single port maximum power 30W,
Whole switch maximum power 240W Support over-current,over-voltage and short-circuit protection Support Soft Start of High Power PD Support sequential boot-up Power Supply Pin:12+/36- 100-240V 3A Max(Input) 52V 5A Max(Output) |
| Cabling type | 100Base-TX: Cat 5e or better UTP/STP(≤100m)
10Base-TX: Cat 5e or better UTP/STP(≤250m) |
| Dimensions
(L x W x H ) |
280mm*180mm*43m |
৳ 14,300.00
CompareNetis P116GH is a 18 Ports standard POE switch that provides 16 FE POE ports , 2 Gigabit Up-link ports and 1 SFP fiber port. Ports 1~16 features POE power supply capability and can be used as Power over Ethernet devices. The power supply port can automatically detect and recognize the powered device that complies with the IEEE 802.3af/at standard and supply power through the network cable. 2 Gigabit uplink ports ensure a smooth transmission for NVR or up-link routers. P116GH is a most economical solution for HD security network.
- Supporting 802.3, 802.u Faster Ethernet, IEEE 802.3ab 1000BASE-T；
- Supports POE IEEE 802.3af/at compliant Powered Device (PD)
- Modes: Normal switch mode/Extended mode(Port1-16:250Metres ultra-long transmission)
- Ports 1~16 features POE power supply capability and can be used as Power over
- Ethernet devices；2*10/100/1000Base-T Uplink and 1*1000Base-X SFP.
- Support full duplex based on IEEE802.3x and half duplex based on Backpressure
- Auto MDI/MDIX crossover for all ports
- Support non-blocking wire speed forwarding
- MAC address auto-learning & auto-aging
- Steel case, the total POE power budget of 240W
- Just Plug and Play
Based on 0 reviews
Be the first to review “NETIS P116GH 16 FE POE+2GE Uplink POE Switch”
Related products
-
Network Switch, Switch
Tenda TEG5310P-8-150W 8 Port L3 Managed PoE Switch
Hardware Network standards IEEE802.3、 IEEE802.3u、 IEEE802.3ab、 IEEE802.3z、 IEEE802.3x、 IEEE802.3af/at、 IEEE802.1p、IEEE802.1q、 IEEE802.1w、 IEEE802.1d、 IEEE802.1s LED Indicator 1*Link/Act or PoE LED indicator 1*Link/1*Link/Act mode converting LED indicator
1*PoE mode converting LED indicator
1*PoE Max LED indicator
1*Power LED indicator
1*SYS LED indicator
Interfaces 8*10/100/1000 Base-T Ethernet ports (Data/Power) 1*10/100/1000 Base-T Ethernet ports (Data)
1*1000 Base-X SFP ports (Data)
Transmission media Recommended: CAT5/5e UTP or better Fan quantity N/A Level of protection Lightning protection for ports: 6kV Lightning protection for power: 6kV
ESD:
Air discharge: ±10kV
Contact discharge: ±8kV
Forwarding mode Store-and-forward Switch capacity 20Gbps Packet forwarding rate 14.90Mpps Buffer 12Mb MAC address table 16K Jombo frame 10K PoE power supply management Support PoE budget Single port: AF: 15.4W, AT: 30W Whole device: 130W
Input voltage 100-240V AC 50/60Hz Power consumption Full load: ＜160W Empty load: ＜12W
Dimension 294.0mmx179.6mmx44.0mm Mounting Desktop mounting: support Wall mounting: support
Rack mounting:non-support
Energy Efficient Support Environment Operating temperature: 0°C – 45℃ Storage temperature: -40°C – 70°C
Operating humidity: (10% – 90%) RH, non-condensing
Storage humidity: (5% – 90%) RH, non-condensing
Certification FCC、CE、RoHS Software L3 Features VLAN-based routing IPv4 static routing adding
Static ARP adding/deleting
ARP aging time configuration
PoE power supply management Supports port PoE configuration and power supply with priority Supports PoE over-temperature protection
Supports PoE scheduled management
Supports intelligent management and PoE-powered device detection
(port status, power assignment and PoE-powered device status)
Security features ARP receiving limit Unknown MAC address discard
DoS attack defense
802.1x security authentication
Radius security authentication
VLAN IEEE 802.1Q VLAN VLAN Layer-3 interfaces
Supports three port modes: Access, Trunk and Hybrid
DHCP Server DHCP Server DHCP Relay
DHCP Snooping
Supports Option 82 policy configuration
Port aggregation Static aggregation LACP dynamic aggregation
Spanning tree
IEEE 802.1d STP (Spanning Tree Protocol)
IEEE 802.1w RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s MSTP (Multiple Spanning Tree Protocol)
Supports edge port
Supports BPDU statistics
Multicast IGMP Snooping V1/V2/V3 Supports port fast leave
Port Mirroring Supports N: 1 port mirroring Quality of Service SP (Strict Priority) SWRR (Simple Weighted Round Robin)
WRR (Weighted Round Robin)
Supports 802.1p port trust mode
Supports DSCP port trust mode
Supports a maximum of 8-queue service quality mapping
ACL Supports MAC ACL and IP ACL Loading and upgrade Supports FTP/TFTP/HTTP upgrade Supports configuration import and export
Management and maintenance Supports Telnet Supports SNMP V1/V2/V3
Supports WEB management and maintenance
Supports Ping/Tracert/Connection Detection
CPU Monitoring and memory monitoring
Local visualization management
SKU: n/a -
Network Switch, Switch
NETIS P110C 8POE+2RJ45 100M Standard POE Switch
Hardware Interface 8*10/100Mbps POE ports（Data/Power) 2*10/100M uplink RJ45 ports (Data)
Basic function Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol Supports POE IEEE 802. 3af/at compliant Powered Device (PD)
Store-and-forward switching scheme
Support IEEE802.3X full duplex and Backpressure half duplex
MAC address auto-learning & auto-agingStandards IEEE 802.3 10BASE-T Ethernet IEEE 802.3i 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3af/at, Power over Ethernet
IEEE 802.3x Flow ControlMode Normal switch mode/Extend mode Data Transfer Rate Etherent:10Mbps(Half-duplex);20Mbps(Full-duplex) Fast Entherent:100Mbps(Half-duplex);200Mbps(Full-duplex)
Store & Forwarding Yes Switching Capacity 2G MAC Address Table Size
2K Jumbo Frame 2048 byte Environment Operation Temperature：0℃～40℃ Storage Temperature：-40℃～70℃
Operation Humidity：10%～90% RH Non-condensing
Storage Humidity：5%～90% RH Non-condensing
Power Input POE Standards
Single port maximum power 30W, Whole switch maximum power 120W
Support over-current,over-voltage and short-circuit protection
Support Soft Start of High Power PD
Support sequential boot-up
Power Supply Pin:12+/36-
100-240V 2A Max(Input)
52V 2.3A Max(Output)
Cabling type 100Base-TX: Cat 5e or better UTP/STP(≤100m) 10Base-TX: Cat 5e or better UTP/STP(≤250m)
Dimensions (L x W x H )
190mm*140mm*43mm SKU: n/a -
Switch
Tenda TEF1105P 5-Port with 4-Port PoE Switch
Hardware Network standards IEEE 802.3、 IEEE 802.3u、IEEE 802.3x、IEEE 802.3af、IEEE 802.3at LED Indicator 5* Link/Ack LED indicators 1 * Power LED indicator
Interfaces 4*10/100 Base-TX Ethernet Ports(Data/Power) 1*10/100 Base-TX Ethernet Port(Data)
Transmission media Recommended: CAT5/5e UTP or better Fan quantity N/A Dimension 100.0mmx100.0mmx26.0mm Level of protection Lightning protection for ports: 6kV Lightning protection for power: 6kV
ESD:
Air discharge: ±10kV
Contact discharge: ±8kV
Forwarding mode Store-and-forward Switch capacity 1Gbps Packet forwarding rate 0.74Mpps Buffer 448K MAC address table 1K Jombo frame N/A PoE budget Single port: AF: 15.4W, AT: 30W Whole device: 58W
Power consumption / Input voltage 100－240V AC 50/60Hz 51V /1.25A DC（Power Adapter ）
Mounting Desktop mounting: support Wall mounting: support
Rack mounting:non-support
Environment Operating Temperature: 0℃~45℃ Storage Temperature: -40℃~70℃
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
Certification FCC、CE、RoHS Software Funtions Standard: the switch functions as a common unmanaged switch and all the ports of the switch can communicate with each other . Extend Mode: If the extend mode is enabled, the transmission distance of both power and data will extend up to 250m(10Mbps), this funcation can replace the extender and parts of the Fiber. It will extend the distance of the whole system and save the cost of the project.
SKU: n/a -
Network Switch, Switch
Tenda TEF1126P-24-250W 24 Port PoE Gigabit Switch
Hardware Network standards IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x, IEEE802.3af/at LED Indicator 24 * Link/Act LEDs 1 * G1 LED
1 * G2/SFP2 LED
1 * PoE-MAX LED
1 * Power LED
Interfaces 24 * 10/100 Base-TX Ethernet ports (Data/Power) 2 * 10/100/1000 Base-T Ethernet ports (Data)
1 * 1000 Base-X SFP port (Combo)
Transmission media Recommended; CAT5/5e UTP or better Fan quantity 1 Dimension 440.0mmx178.8mmx44.0mm Level of protection Lightning protection for ports; 6kV Lightning protection for power; 6kV
ESD;
Air discharge; ±10kV
Contact discharge; ±8kV
Forwarding mode Store-and-forward Switch capacity 8.8 Gbps Packet forwarding rate 6.55 Mpps Buffer 4M MAC address table 16K Jombo frame N/A PoE budget Single port; AF; 15.4W, AT; 30W Whole device; 230W
Power consumption / Input voltage 100-240V AC 50/60Hz Mounting Desktop mounting; support Wall mounting; support
Rack mounting; support
Environment Operating Temperature; 0℃~45℃ Storage Temperature; -40℃~70℃
Operating Humidity; 10%~90% non-condensing
Storage Humidity; 5%~90% non-condensing
Certification FCC、CE、RoHS SKU: n/a
There are no reviews yet.