NETIS P124GH 24 FE POE+2GE Uplink POE Switch

Interface 24*10/100Mbps POE ports(Data/Power)

2*10/100/1000M uplink RJ45 ports (Data)

2*10/100/1000M uplink SFP slot ports (Data)

 Basic function  Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol

Supports POE IEEE 802. 3af/at compliant Powered Device (PD)

Store-and-forward switching scheme
Support IEEE802.3X full duplex and Backpressure half duplex
MAC address auto-learning & auto-aging

 Standards  IEEE 802.3 10BASE-T Ethernet

IEEE 802.3i 10BASE-T Ethernet

IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3af/at, Power over Ethernet
IEEE 802.3x Flow Control

 Mode  Normal switch mode/Extend mode
 Data Transfer Rate Etherent:10Mbps(Half-duplex);20Mbps(Full-duplex)

Fast Entherent:100Mbps(Half-duplex);200Mbps(Full-duplex)

 Store & Forwarding Yes
 Switching Capacity 12.8G
 MAC Address

Table Size

 Jumbo Frame  2048 byte
 Environment  Operation Temperature:0℃~40℃

Storage Temperature:-40℃~70℃

Operation Humidity:10%~90% RH Non-condensing

Storage Humidity:5%~90% RH Non-condensing

 Power Input POE


 Single port maximum power 30W,

Whole switch maximum power 360W

Support over-current,over-voltage and short-circuit protection

Support Soft Start of High  Power PD

Support sequential boot-up

Power Supply Pin:12+/36-

100-240V 4.5A Max(Input)

52V 7A Max(Output)

 Cabling type  100Base-TX: Cat 5e or better UTP/STP(≤100m)

10Base-TX: Cat 5e or better UTP/STP(≤250m)


(L x W x H )


৳ 22,000.00


Netis P124GH is a 30 Ports standard POE switch that provides 24 FE POE ports , 2 Gigabit Up-link ports and 2 SFP fiber port. Ports 1~24 features POE power supply capability and can be used as Power over Ethernet devices. The power supply port can automatically detect and recognize the powered device that complies with the IEEE 802.3af/at standard and supply power through the network cable. 2 Gigabit uplink ports ensure a smooth transmission for NVR or up-link routers. P124GH is a most economical solution for HD security network.


  • Supporting 802.3, 802.u Faster Ethernet, IEEE 802.3ab 1000BASE-T;
  • Supports POE IEEE 802.3af/at compliant Powered Device (PD)
  • Modes: Normal switch mode/Extended mode(Port1-24:250Metres ultra-long transmission)
  • Ports 1~24 features POE power supply capability and can be used as Power over
  • Ethernet devices;2*10/100/1000Base-T Uplink and 2*1000Base-X SFP.
  • Support full duplex based on IEEE802.3x and half duplex based on Backpressure
  • Auto MDI/MDIX crossover for all ports
  • Support non-blocking wire speed forwarding
  • MAC address auto-learning & auto-aging
  • Steel case, the total POE power budget of 360W
  • Just Plug and Play
Categories: ,

Based on 0 reviews

0.0 overall

Be the first to review “NETIS P124GH 24 FE POE+2GE Uplink POE Switch”

There are no reviews yet.