NETIS PE6108GH 8 Port Gigabit Ethernet PoE Switch/4 Port PoE/802.3at/af
| Hardware | |
| Interface | 8 10/100/1000Mbps RJ45 port, including 4 PoE ports (Port 1-Port 4 |
| LED | PWR, MAX, 1-4 PoE, 1-8 1000M, 1-8 LINK/ACT |
| Power Supply | 100-240 V AC/50-60Hz |
| PoE Power | 85Watts (max. with PD connected) |
| Dimensions (L x W x H ) | 280 x 173 x 43mm |
| Switching Features | |
| Standard | IEEE 802.3u 1000Base-TX, IEEE 802.3u 100BASE –TX, IEEE 802.3 10BASE –T, IEEE 802.3at /af, IEEE 802.3x Flow Control |
| Access Method | CSMA/CD |
| Transmission Method | Store and Forward |
| Switching Fabric Capacity | 16Gbps |
| MAC Address Table | 8K, auto-learning & auto-aging |
| Flow Control | IEEE 802.3x Flow Control, Full-Duplex mode Back-Pressure Flow Control, Half-Duplex mode |
| PoE | 30 Watts (Max. each port) 60Watts (Max. all ports) |
| Others | |
| Certification | FCC, CE |
| Environment | Operating Temperature: 0℃~40℃ Storage Temperature: -40℃~70℃ Operating Humidity: 10%~90%RH, non-condensing Storage Humidity: 5%~90%RH, non-condensing |
| Package | 1*PE6108GH 1*Power Cord 2*Brackets 1*Quick Installation Guide |
৳ 8,500.00
CompareThe netis PE6108GH Gigabit Ethernet PoE Switch provides a great selection for expanding your home or office network. 4 of the 8 10/100/1000Mbps RJ45 ports support Power over Ethernet(PoE) function. It can automatically detect and supply power with the IEEE 802.3at/af compliant Powered Devices (PDs), like PoE APs, IP Phones,IP cameras, etc.In this case, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets.
- 8 10/100/1000Mbps Auto-Negotiation RJ45 ports, with PoE function(Port 1-4)
- Complies with IEEE 802.3at/af standards
- Supports PoE power up to 30W for each PoE port, 60W for all PoE ports
- Supports PoE+ IEEE 802.3at/af compliant Powered Device (PD)
- Supports 8K MAC address table, MAC address auto-learning & auto-aging
- Supports IEEE 802.3x flow control for Full-duplex mode,Back-pressure flow control for Half-duplex mode ports
- Plug and play, no configuration required
- Power MAX LED to monitor the PoE power status
- Steel desktop design, with internal power supply
Based on 0 reviews
Be the first to review “NETIS PE6108GH 8 Port Gigabit Ethernet PoE Switch/4 Port PoE/802.3at/af”
Related products
-
Switch
Tenda SG105 5 Port Gigabit Desktop Switch
Hardware Network standards IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab LED Indicator 1* Power, 5* Link/Act Interfaces 5*10/100/1000 Base-T Ethernet ports (Auto MDI/MDIX) Transmission media Recommended: CAT5/5e UTP or better Fan quantity N/A Dimension 93.0mm×66.0mm×23.0mm Material Plastic Level of protection ESD:$Air discharge: ±8kV$Contact discharge: ±6kV Forwarding mode Store-and-forward Switch capacity 10Gbps Packet forwarding rate 7.44Mpps Buffer 1Mb MAC address table 2K Jombo frame N/A Power Input: 100-240V AC 50/60Hz$Output: 5.0V 0.6A ( External Power Adapter ) Power consumption Max:<1.7W Mounting Desktop mounting: support$Wall mounting: support$Rack mounting:non-support Environment Operating temperature: 0°C – 45℃$Storage temperature: -40°C – 70°C$Operating humidity: (10% – 90%) RH, non-condensing$Storage humidity: (5% – 90%) RH, non-condensing Certification CE, FCC, RoHS Software Protocols CDMA/CD MAC address learning Auto-Learning and Auto-Aging Funtions plug-and-play SKU: n/a -
Network Switch, Switch
NETIS P106C 4POE+2RJ45 100M 6 PORT Standard POE Switch
Hardware Interface 4*10/100Mbps POE ports（Data/Power） 2*10/100M uplink RJ45 ports (Data)
Basic function Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol Supports POE IEEE 802. 3af/at compliant Powered Device (PD)
Store-and-forward switching scheme
Support IEEE802.3X full duplex and Backpressure half duplex
MAC address auto-learning & auto-agingStandards IEEE 802.3 10BASE-T Ethernet IEEE 802.3i 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3af/at, Power over Ethernet
IEEE 802.3x Flow ControlMode Normal switch mode/Extend mode Data Transfer Rate Etherent:10Mbps(Half-duplex);20Mbps(Full-duplex) Fast Entherent:100Mbps(Half-duplex);200Mbps(Full-duplex)
Store & Forwarding Yes Switching Capacity 1.2G MAC Address Table Size
2K Jumbo Frame 2048 byte Environment Operation Temperature：0℃～40℃ Storage Temperature：-40℃～70℃
Operation Humidity：10%～90% RH Non-condensing
Storage Humidity：5%～90% RH Non-condensing
Power Input POE Standards
Single port maximum power 30W, Whole switch maximum power 60W Max
Support over-current,over-voltage and short-circuit protection
Support Soft Start of High Power PD
Support sequential boot-up
Power Supply Pin:12+/36-
100-240V 1.5A Max(Input)
52V 1.15A Max(Output)
Cabling type 100Base-TX: Cat 5e or better UTP/STP(≤100m) 10Base-TX: Cat 5e or better UTP/STP(≤250m)
Dimensions (L x W x H )
125mm*115mm*34mm SKU: n/a -
Network Switch, Switch
NETIS ST3108C 8 Port Fast Ethernet Switch
Hardware Interface 8 * 10/100M RJ45 port, Auto-Negotiation, Auto MDI/MDIX LED PWR, 1-8 Power Supply 100-240V 0.3A(Input) Dimensions (L x W x H ) 88 x 63 x 21mm Switching Features Standard IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX,
IEEE 802.3x Flow ControlAccess Method CSMA/CD Transmission Method Store and Forward Data Transmission Rate 10/100Mbps(Half-duplex)
20/200Mbps(Full-duplex)MAC Address Table 2K Others Certification FCC, CE, BSMI Environment Operating Temperature: 0℃~40℃
Storage Temperature: -20℃~70℃
Operating Humidity: 5%~90% non-condensing
Storage Humidity: 5%~90% non-condensingPackage 1 * ST3108C
1 * Quick Installation Guide
1 * Power AdapterSKU: n/a -
Switch
Tenda TEG3210P 8G+2SFP Managed PoE Switch
TEG3210P is the best choice for wireless and surveillance projects. Besides the useful management features, it also provides 8 10/100/1000 Base-T Ethernet ports and 2 separate 1000 Mbps Base-X Gigabit SFP slots. Ports 1~8 applies IEEE 802.3af PoE (15.4W) or 802.3at PoE+ (30W) compliance, up to 40W power output per PoE port, which can supply power to high-power PDs such as dual band/11AC devices. The switch can transmit data at the same time to AP, IP Camera or IP Phone via Cat.5 twisted-pair cables. In addition, it provides stronger safety protection system, improved QoS policy, multiple VLAN features and higher availability of maintenance. To sum up, Tenda 8G+2SFP Managed PoE Switch is an ideal and safe switch to set up your network. TEG3210P, it is the best choice for wireless and surveillance projects. Besides the useful management features, it also provides 8 10/100/1000 Base-T Ethernet ports and 2 separate 1000 Mbps Base-X Gigabit SFP slots. Ports 1~8 applies IEEE 802.3af PoE (15.4W) or 802.3at PoE+ (30W) compliance, up to 40W power output per PoE port, which can supply power to high-power PDs such as dual band/11AC devices. The switch can transmit data at the same time to AP, IP Camera or IP Phone via Cat.5 twisted-pair cables. In addition, it provides stronger safety protection system, improved QoS policy, multiple VLAN features and higher availability of maintenance. To sum up, Tenda 8G+2SFP Managed PoE Switch is an ideal and safe switch to set up your network. Tenda 8G+2SFP Managed PoE Switch has 8 Gigabit Ethernet ports and 2 SFP independent optical ports; Ports 1~8 support PoE (AT/AF) and up to 40W power output per PoE port.
SKU: n/a
There are no reviews yet.