NETIS WF2520P 300Mbps Wireless N High Power Ceiling-Mounted Access Point (Passive PoE)
| Wireless | |
| Standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Signal Rate | Up to 300Mbps |
| Frequency Range | 2.4-2.4835GHz |
| Transmit Power | <20dBm (For countries using CE Standards) <30dBm (For countries using FCC Standards) |
| Data Transfer Rates | 802.11n: 40MHz(300Mbps, 270Mbps, 240Mbps, 180Mbps, 120Mbps, 90Mbps, 60Mbps, 30Mbps) 20MHz (144Mbps, 130Mbps, 115Mbps, 86Mbps, 57Mbps, 43Mbps, 28Mbps, 14Mbps) (Auto-Sense) 801.11g: (54Mbps, 48Mbps, 36Mbps, 24Mbps, 18Mbps, 12Mbps, 11Mbps, 9Mbps, 6Mbps) 802.11b: (11Mbps,9Mbps, 6Mbps, 5.5Mbps, 2Mbps, 1Mbps) |
| Wireless Modes | Access Point, Client, WDS, AP+WDS, Client+Repeater |
| Wireless Security | WEP (64/128-bit), WPA-PSK, WPA2-PSK, WPA-PSK/WPA2-PSK Mixed Mode SSID Broadcast Enable/Disable MAC Address Filtering |
| Hardware | |
| Standards | IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX |
| Interface | WAN/PoE: 10/100Mbps Auto MDI/MDIX RJ45 LAN port, PassivePoE Supported LAN: 10/100Mbps Auto MDI/MDIX RJ45 LAN port, |
| LED Indicators | System, Wi-Fi |
| Buttons | RESET |
| Antenna | 2* Internal Antenna |
| Power Supply | PassivePoE/ DC 24V/0.5A (Output) |
| Software | |
| Operation Modes | AP, AP Router, WISP |
| WAN Connection Types | DHCP, Static IP,PPPoE, Russia PPPoE, L2TP/Russia L2TP, PPTP/Russia PPTP |
| Port Forwarding | Virtual Servers, UPnP, DMZ |
| QoS | Bandwidth Control |
| Access Control | MAC Filtering |
| Others | Dynamic DNS, Firmware Upgrade, Backup & Restore |
| Others | |
| Certification | FCC, CE |
| Environment | Operating Temperature: 0℃~40℃ Storage Temperature: -40℃~70℃ Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing |
| Package | 1* WF2520P 1* 24V/500mA Power Adapter 1* PoE Power Injector 1* Mounting Kit 1* Ethernet Cable 1* Quick Installation Guide |
Compare
The netis 300Mbps Wireless N High Power Ceiling-Mounted Access Point WF2520P provides long range, high performance wireless Internet access over large areas.It provides you multiple wireless modes including Access Point, AP Router, Client, WDS, Repeater, and WISP, for flexible wireless network setup and deployment. Also, with the passive PoE design, you may easily establish a solution where electrical socket is unavailable or hard to reach. Under the high power mode, you will enjoy much better network experience in large homes, multi-floor offices or warehouses.
- Wireless N transfer speed up to 300Mbps
- High transmission power to boost wireless signal for further distance
- Provides powerful Wi-Fi coverage that easily penetrates walls obstructions and eliminatesdead zones
- DC power input and alternative passive PoEabilityfor flexible deployment
- Stylish ceiling-mounted appearance for easy Installation to wall or ceiling surface
- Supports Access Point, AP Router, Client, WDS, Repeater, and WISP modes
- Zero configuration under default Access Point mode
Quick setup, with built-in multilingual management page
Based on 0 reviews
Be the first to review “NETIS WF2520P 300Mbps Wireless N High Power Ceiling-Mounted Access Point (Passive PoE)”
Related products
-
Access Point & Range Extender
Netgear WAX615 AX3000 Dual-Band PoE Multi-Gig Insight Managed WiFi 6 Access Point
Access Point & Range ExtenderNetgear WAX615 AX3000 Dual-Band PoE Multi-Gig Insight Managed WiFi 6 Access Point
PHYSICAL SPECIFICATION Dimensions 9.5 x 9.5 x 1.58 in (241.5 x 241.5 x 40.2 mm) TECHNICAL SPECS Speed AX3000 Radio 5GHz; 2×2 20/40/80/160MHz 2.4GHz 2×2 20/40MHz Theoretical Throughput 5GHz ;2.4Gbps 2.4GHz 0.6Gbps Antenna Gain 5GHz; 2.84dBi 2.4GHz 2.94dBi Max Wireless Tx Power 5GHz L; 29.35dBm 2.4GHz 20.03dBm # of Max Users 256 # of Concurrent Users 60 Ideal Use Small and Medium Business Ethernet port 2.5GbE PoE Yes Remote management Insight or Standalone Third party support Domotz SKU: n/a -
Access Point & Range Extender
Tenda i9 300 Mbps Ceiling Mount Access Point
Overview
I9 is a wireless access point specially designed by tenda for office, bar, coffee shop and other indoor environments.It works in the 2.4GHz band, and the wireless rate can reach 300Mbps.Built-in 2 high gain omni-directional MIMO antennas which give powerful WIFI signal penetration and coverage.At the same time, the device built-in power adjustment mode, the user can adjust the transmitted power according to the actual environment.The device adopts standard 802.3af PoE power supply, which can guarantee the users to realize long-distance network power supply without changing the original power network.With simple design,it can be installed directly on the wall or the ceiling,it do not affect the original building structure.And it support TENDA whole series wireless controller to management and deployment.
Multiple anti-interference wireless stable and not dropped.
Provide stable and fast wireless coverage for budget hotels, small and medium enterprises, and small and medium sized consumer sites.
SKU: n/a -
Access Point
Tenda AP5 N300 Wireless Desktop Access Point
Hardware Dimension 148*146.2*31.5mm Deployment Desktop/ Wall Mount Interfaces 2*10/100Mbps Ethernet Port Antennas Gain 3*5dBi Omini-directional detachable antenna Reset/WPS Button 1 Range Extender Button 1 Power Consumption 3.7W LED Indicator SYS,WPS, Bridge, WiFi, LAN1,LAN2 Power Method 12V1A Passive PoE or DC Adapter Reception Sensitivity MCS0: -96dbm MCS7: -72dbm Wireless Frequency Range 2.400 – 2.4835 GHz Compliant Standards IEEE 802.11b/g/n Channel Bandwidth 20/40MHz Maximum Wireless Rate 300Mbps Max. No. of SSID 2 SSID Software Operating mode AP/Universal Repeater/Client(Station)/WISP(Client Router)/Router LAN Settings Static IP Dynamic IP Enable/Disable Wireless Radio Support SSID Hidden Support Wireless Client isolation Support SSID Isolation Support Client Limitation For SSID Support Wireless Access Control Support Weak Signal Client Limitation Support WMM Capable Support Wireless Security 64/128 WEP,WPA-PSK,WPA2-PSK,WPA VLAN Tagging for SSID Support DHCP Server Support VPN Pass-Through Support Dyndns Support Username Managerment Support System Logs Support Managed By Controller M3 or Tenda Router with AP Controller feature Others Operation Temperature -10℃ ~ 45℃ Storage temperature -30℃ ~ 70℃ Operating Humidity 10%~90% non-condensing Storage Humidity 10%~90% non-condensing Default login IP 192.168.0.254 Certification FCC/CE/RoHS SKU: n/a -
Access Point & Range Extender
Tenda B6 5GHz 11n 300Mbps Outdoor Waterproof Professional Basestation
Overview
B6 5GHz 11n 300Mbps Basestation is designed for PtP and PtMP solutions for rural wireless connectivity and CCTV surveillance.Features with two RP- SMA enable it to pair with dish antenna or sector antenna to establish PtP backhaul connection and P2MP link. It adopts Tenda TDMA (Time Division Multiple Access) proprietary protocol–TD-MAX to improve performance and capacity. The auto-bridging technology enable it easy to setup for both business and home users.
D-MAX-TendaTDMA proprietary protocol
TD-MAX is Tenda TDMA (Time Division Multiple Access) proprietary protocol to improve performance and capacity for wireless WISP outdoor application scenarios. In outdoor enviroment, the CPE use highly directional antennas to connect to the Basestation from distances that can span several kilometers. the CPE can’t sense each other, they become“hidden nodes” and cannot coordinate access to the wireless channel. Thus the Basestation experiences frequent collisions from stations transmitting simultaneously. As the network scales, these collisions build up exponentially, increasing latency and lowering throughput.With TD-MAX, it coordinate all the data transmission and allocates time to active clients to provide greater noise immunity performance when compared to the conventional 802.11 CSMA/CA (Carrier Sense Multiple Access / Collision Avoidance) protocol.
SKU: n/a
There are no reviews yet.