TEG5310P-8-150W is a Tenda Layer-3 managed PoE switch. To meet the demand of high-performance access, the switch provides 9 10/100/1000 Mbps Base-T Ethernet ports and 1 separate 1000 Mbps Base-X SFP ports, and a PoE power of up to 130 W.With an innovative hardware structure and software platform, it features a powerful processing capacity and complete security protection mechanism, making management and maintenance easy and simple, fully meeting the demands of high-density user access and high-performance aggregation, ideal for the aggregation layer or access layer of such medium to large networks as enterprises and campuses.
Network Switch, Switch
Tenda TEG5310P-8-150W 8 Port L3 Managed PoE Switch
| Hardware | |
| Network standards | IEEE802.3、 IEEE802.3u、 IEEE802.3ab、 IEEE802.3z、 IEEE802.3x、 IEEE802.3af/at、 IEEE802.1p、IEEE802.1q、 IEEE802.1w、 IEEE802.1d、 IEEE802.1s |
| LED Indicator | 1*Link/Act or PoE LED indicator
1*Link/1*Link/Act mode converting LED indicator 1*PoE mode converting LED indicator 1*PoE Max LED indicator 1*Power LED indicator 1*SYS LED indicator |
| Interfaces | 8*10/100/1000 Base-T Ethernet ports (Data/Power)
1*10/100/1000 Base-T Ethernet ports (Data) 1*1000 Base-X SFP ports (Data) |
| Transmission media | Recommended: CAT5/5e UTP or better |
| Fan quantity | N/A |
| Level of protection | Lightning protection for ports: 6kV
Lightning protection for power: 6kV ESD: Air discharge: ±10kV Contact discharge: ±8kV |
| Forwarding mode | Store-and-forward |
| Switch capacity | 20Gbps |
| Packet forwarding rate | 14.90Mpps |
| Buffer | 12Mb |
| MAC address table | 16K |
| Jombo frame | 10K |
| PoE power supply management | Support |
| PoE budget | Single port: AF: 15.4W, AT: 30W
Whole device: 130W |
| Input voltage | 100-240V AC 50/60Hz |
| Power consumption | Full load: ＜160W
Empty load: ＜12W |
| Dimension | 294.0mmx179.6mmx44.0mm |
| Mounting | Desktop mounting: support
Wall mounting: support Rack mounting:non-support |
| Energy Efficient | Support |
| Environment | Operating temperature: 0°C – 45℃
Storage temperature: -40°C – 70°C Operating humidity: (10% – 90%) RH, non-condensing Storage humidity: (5% – 90%) RH, non-condensing |
| Certification | FCC、CE、RoHS |
| Software | |
| L3 Features | VLAN-based routing
IPv4 static routing adding Static ARP adding/deleting ARP aging time configuration |
| PoE power supply management | Supports port PoE configuration and power supply with priority
Supports PoE over-temperature protection Supports PoE scheduled management Supports intelligent management and PoE-powered device detection (port status, power assignment and PoE-powered device status) |
| Security features | ARP receiving limit
Unknown MAC address discard DoS attack defense 802.1x security authentication Radius security authentication |
| VLAN | IEEE 802.1Q VLAN
VLAN Layer-3 interfaces Supports three port modes: Access, Trunk and Hybrid |
| DHCP Server | DHCP Server
DHCP Relay DHCP Snooping Supports Option 82 policy configuration |
| Port aggregation | Static aggregation
LACP dynamic aggregation Spanning tree IEEE 802.1d STP (Spanning Tree Protocol) IEEE 802.1w RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s MSTP (Multiple Spanning Tree Protocol) Supports edge port Supports BPDU statistics |
| Multicast | IGMP Snooping V1/V2/V3
Supports port fast leave |
| Port Mirroring | Supports N: 1 port mirroring |
| Quality of Service | SP (Strict Priority)
SWRR (Simple Weighted Round Robin) WRR (Weighted Round Robin) Supports 802.1p port trust mode Supports DSCP port trust mode Supports a maximum of 8-queue service quality mapping |
| ACL | Supports MAC ACL and IP ACL |
| Loading and upgrade | Supports FTP/TFTP/HTTP upgrade
Supports configuration import and export |
| Management and maintenance | Supports Telnet
Supports SNMP V1/V2/V3 Supports WEB management and maintenance Supports Ping/Tracert/Connection Detection CPU Monitoring and memory monitoring Local visualization management |
৳ 13,000.00
CompareBased on 0 reviews
Be the first to review “Tenda TEG5310P-8-150W 8 Port L3 Managed PoE Switch”
Related products
-
Network Switch, Switch
NETIS P110C 8POE+2RJ45 100M Standard POE Switch
Hardware Interface 8*10/100Mbps POE ports（Data/Power) 2*10/100M uplink RJ45 ports (Data)
Basic function Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol Supports POE IEEE 802. 3af/at compliant Powered Device (PD)
Store-and-forward switching scheme
Support IEEE802.3X full duplex and Backpressure half duplex
MAC address auto-learning & auto-agingStandards IEEE 802.3 10BASE-T Ethernet IEEE 802.3i 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3af/at, Power over Ethernet
IEEE 802.3x Flow ControlMode Normal switch mode/Extend mode Data Transfer Rate Etherent:10Mbps(Half-duplex);20Mbps(Full-duplex) Fast Entherent:100Mbps(Half-duplex);200Mbps(Full-duplex)
Store & Forwarding Yes Switching Capacity 2G MAC Address Table Size
2K Jumbo Frame 2048 byte Environment Operation Temperature：0℃～40℃ Storage Temperature：-40℃～70℃
Operation Humidity：10%～90% RH Non-condensing
Storage Humidity：5%～90% RH Non-condensing
Power Input POE Standards
Single port maximum power 30W, Whole switch maximum power 120W
Support over-current,over-voltage and short-circuit protection
Support Soft Start of High Power PD
Support sequential boot-up
Power Supply Pin:12+/36-
100-240V 2A Max(Input)
52V 2.3A Max(Output)
Cabling type 100Base-TX: Cat 5e or better UTP/STP(≤100m) 10Base-TX: Cat 5e or better UTP/STP(≤250m)
Dimensions (L x W x H )
190mm*140mm*43mm SKU: n/a -
Switch
Tenda TEG1118P-16-250W 16GE+2SFP Ethernet Switch With 16-Port PoE
Hardware Network standards IEEE 802.3/IEEE 802.3u/IEEE 802.3ab/IEEE 802.3x/ IEEE 802.3af/IEEE 802.3at LED Indicator 16 * Link/Act LEDs 2 * SFP LED
1 * PoE-MAX LED
1 * Power LED
Interfaces 16*10/100/1000 Base-T ports(Data/Power) Transmission media Recommended; CAT5/5e UTP or better Fan quantity 1 Dimension 440*178.8*44mm Level of protection Lightning protection for ports; 6kV Lightning protection for power; 6kV
ESD;
Air discharge; ±10kV
Contact discharge; ±8kV
Forwarding mode Store-and-forward Switch capacity 36bps Packet forwarding rate 26.8Mpps Buffer 2M MAC address table 8K Jombo frame N/A PoE budget Single port; AF; 15.4W, AT; 30W Whole device; 230W
Power consumption / Input voltage 100-240V AC 50/60Hz Mounting Desktop mounting; support Wall mounting; support
Rack mounting ; support
Environment Operating Temperature; 0℃~45℃ Storage Temperature; -40℃~70℃
Operating Humidity; 10%~90% non-condensing
Storage Humidity; 5%~90% non-condensing
Certification FCC、CE、RoHS SKU: n/a -
Switch
Tenda S16 16 Ports Ethernet Network Switch
Overview
The Tenda S16 16-Port 10/100Mbps Switch provides simple and ideal solution to expand network for large home, building, leased or rented house and SMB. S16 connects with a router and connect with fifteen additional computers or other Ethernet-based devices such as a printer, Network-Attached Storage (NAS), or Internet camera to increase the functionality of your network. Housed in sturdy plastic case with compact size, it is the best choice for desktop installation.
Main Features
>> 16 Autosensing 10/100Mbps switched ports with auto MDI/MDI-X crossover detection
>> Up to 200Mbps full duplex bandwidth on each port
>> Compact size fits into any environment
>> Address Learning and Aging, and Data Flow Control for enhanced transmissionSKU: n/a -
Network Switch, Switch
NETIS ST3105C 5 Port Fast Ethernet Switch
Hardware Interface 5 * 10/100M RJ45 port, Auto-Negotiation, Auto MDI/MDIX LED PWR, 1-5 Power Supply 100-240V 0.3A(Input) Dimensions (L x W x H ) 85x 75 x 222 mm Switching Features Standard IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX,
IEEE 802.3x Flow ControlAccess Method CSMA/CD Transmission Method Store and Forward Data Transmission Rate 10/100Mbps(Half-duplex)
20/200Mbps(Full-duplex)MAC Address Table 2K Others Certification FCC, CE, BSMI Environment Operating Temperature: 0℃~40℃
Storage Temperature: -20℃~70℃
Operating Humidity: 5%~90% non-condensing S
torage Humidity: 5%~90% non-condensingPackage 1 * ST3105C
1 * Quick Installation Guide
1 * Power AdapterSKU: n/a
There are no reviews yet.